FERROTACK
Technical data
metal sheet: black plate DC01 A
coating: butyl rubber
colour: black, grey
Test reports
General Appraisal Certificate
Chemical resistance test in compliance with DIN 4030
FERROTACK VB I R 120/150/170 metal water stop roll
Water stop (black plate) with full coating on one side of butyl rubber.
- For sealing of construction joints in concrete structures
- 20000 x 120 x 0,75 mm 335666 20 m (length x height x thickness)
- 20000 x 150 x 0,75 mm 335592 20 m (length x height x thickness)
- 20000 x 170 x 0,60 mm 336813 20 m (length x height x thickness)
FERROTACK VB I 120/150/170 water stop stripes
Water stop (black plate) with full coating on one side of butyl rubber.
- For sealing of construction joints in concrete structures
- 2000 x 120 x 0,75 mm 335659 50 m (length x height x thickness)
- 2000 x 150 x 0,75 mm 335593 50 m (length x height x thickness)
- 2000 x 170 x 0,60 mm 336592 50 m (length x height x thickness)
FERROTACK VB II 120/150/170 metal water stop stripes
Water stop (black plate) with full coating on both sides of butyl rubber.
- For sealing of construction joints in concrete structures
- 2000 x 120 x 0,75 mm 357742 50 m (length x height x thickness)
- 2000 x 150 x 0,75 mm 335594 50 m (length x height x thickness)
- 2000 x 170 x 0,60 mm 336593 50 m (length x height x thickness)
FERROTACK-STOSS
Vertical metal sheet element for water pressure tight sealing of concrete elements at over lappings. Partial coating of butyl rubber.
- 250 x 1,5 mm (stripe width x thickness)
- length as required by structure
FERROTACK-ECK
Vertical metal sheet element for water pressure tight sealing of concrete elements at corners. Partial coating of butyl rubber.
- 125 x 125 x 1,5 mm (stripe width x thickness)
- length as required by structure
FERROTACK I corner element
Metal element for formation of 90 degree corners for the FERROTACK system with partial coating of butyl rubber, which is fixed on the lower side.
- Optimum connection to the vertical sealing FERROTACK-ECK element
- 120 x 250 x 0,75 mm (length x height x thickness)
- 150 x 250 x 0,75 mm (length x height x thickness)
- 170 x 250 x 0,60 mm (length x height x thickness)
FERROTACK II corner element
Metal element for formation of 90 degree corners for the FERROTACK system with partial coating of butyl rubber, which is fixed on the lower as well as on the upper side.
- Optimum connection to the vertical sealing FERROTACK-ECK element
- 120 x 250 x 0,75 mm (width x side length x thickness)
- 150 x 250 x 0,75 mm (width x side length x thickness)
- 170 x 250 x 0,60 mm (width x side length x thickness)
FERROTACK VB I corner element
Metal element for formation of 90 degree corners for the FERROTACK system with entire coating on one side of butyl rubber.
- Optimum connection to the vertical sealing FERROTACK-ECK element
- 120 x 250 x 0,75 mm (width x side length x thickness)
- 150 x 250 x 0,75 mm (width x side length x thickness)
- 170 x 250 x 0,60 mm (width x side length x thickness)
FERROTACK VB II corner element
Metal element for formation of 90 degree corners for the Ferrotack system with entire coating on both sides of butyl rubber.
- Optimum connection to the vertical sealing Ferrotack-Eck element
- 120 x 250 x 0,75 mm (width x side length x thickness)
- 150 x 250 x 0,75 mm (width x side length x thickness)
- 170 x 250 x 0,60 mm (width x side length x thickness)
Equipment
FERRODEHN
water pressure tight connection
Befestigungs-Spange RKM 170
cramp for fixing
Befestigungs-Spange Typ SF
cramp for fixing
Befestigungs-Spange Typ KK
cramp for fixing
Befestigungs-Spange Typ S
cramp for fixing
Cramp for fixing
Befestigungs-Spange Typ VF
cramp for fixing